Anodized Aluminum Cyclone With a Flow of 16.7Lpm and a 2.5µm Cutpoint

 

 

Inlet/Outlet

Inlet: 1.246" OD 

Outlet: 1.25" ID 

Specifications

  • Anodized Aluminum
  • 16.7Lpm Flow Rate, 2.5µm Cutpoint
  • Removable Top for Easy Cleaning
  • Dimensions: 4.8" x 6.6" x 2.3" (12.2 x 16.8 x 5.8 cm)
  • Weight: 2.1 lb (1 kg)

EPA Approved

  • EQPS-0316-233:  “Met One Instruments, Inc. E-FRM,” configured for filter sampling of ambient particulate matter using the US EPA PM10 inlet specified in 40 CFR Appendix L, Figs. L-2 thru L-19, equipped with a URG-2000-30EGN Cyclone particle size separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, using 47 mm PTFE membrane filter media, and operating with firmware version R1.1.0 and later, and operated in accordance with Met One E-FRM PM2.5 operating manual.

  • EQPS-0316-233:  “URG-MASS100 Single PM2.5 Sampler,” operated with firmware version 4B or 5.0.1, configured for “Single 2.5” operation with a URG-2000-30EGN Cyclone Particle Size Separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, and in accordance with the URG-MASS100 Operator’s Manual and with the requirements and sample collection filters specified in 40 CFR part 50, appendix L.

  • EQPS-0316-234:  “URG-MASS300 Sequential PM2.5 Sampler,” operated with firmware version 4B or 5.0.1, configured for “Multi 2.5” operation with a URG-2000-30EGN Cyclone particle size separator, and operated for a continuous 24-hour sample period at a flow rate of 16.67 liters/minute, and in accordance with the URG-MASS300 Operator’s Manual and with the requirements and sample collection filters specified in 40 CFR part 50, appendix L.

  • EPA has determined, in accordance with 40 CFR part 53, that these methods should be designated as equivalent methods.

Anodized Aluminum Cyclones

 

URG-2000-EDB-A

 

URG-2000-EGN-A

 

URG-2000-EGN-A1